nicolas
/
esp32-ds18b20-ledc
mirror of https://github.com/nmasse-itix/esp32-ds18b20-ledc.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
Test program for my solar controller breadboard
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
84 Commits
1 Branch
0 Tags
156 KiB
 
 
 
Branch: main
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'main'
${ noResults }
Nicolas Massé 9f4a609964
add ledc 		4 years ago
components Update component submodules. 6 years ago
main add ledc 4 years ago
.gitignore Convert repository to DS18B20 example project. 8 years ago
.gitmodules add ledc 4 years ago
CMakeLists.txt Support for parasitic power - WIP. 6 years ago
LICENSE Convert repository to DS18B20 example project. 8 years ago
Makefile Convert repository to DS18B20 example project. 8 years ago
README.md add ledc 4 years ago
sdkconfig.defaults Add support for Parasitic Power mode, including secondary GPIO control of external "strong pull-up" circuit. 6 years ago

README.md

esp32-ds18b20-ledc

Introduction

This is an example application for the Maxim Integrated DS18B20 Programmable Resolution 1-Wire Digital Thermometer device and LEDs.

Ensure that submodules are cloned:

$ git clone --recursive https://github.com/nmasse-itix/esp32-ds18b20-ledc.git

Build the application with:

$ cd esp32-ds18b20-ledc
$ idf.py menuconfig    # set your serial configuration and the 1-Wire GPIO - see below
$ idf.py build
$ idf.py -p (PORT) flash monitor

The program should detect your connected devices and periodically obtain temperature readings from them, displaying them on the console.

Dependencies

This application makes use of the following components (included as submodules):

Hardware

To run this example, connect one or more DS18B20 devices to a single GPIO on the ESP32. Use the recommended pull-up resistor of 4.7 KOhms, connected to the 3.3V supply.

idf.py menuconfig can be used to set the 1-Wire GPIO.

Connect two leds on GPIO 19 and 21 with a small resistor (69 ohms).

Acknowledgements

"1-Wire" is a registered trademark of Maxim Integrated.