esp32-ds18b20-ledc/main/app_main.c

/*
 * MIT License
 *
 * Copyright (c) 2017 David Antliff
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_system.h"
#include "esp_log.h"

#include "owb.h"
#include "owb_rmt.h"
#include "ds18b20.h"

#define GPIO_DS18B20_0       (CONFIG_ONE_WIRE_GPIO)
#define MAX_DEVICES          (8)
#define DS18B20_RESOLUTION   (DS18B20_RESOLUTION_12_BIT)
#define SAMPLE_PERIOD        (1000)   // milliseconds

_Noreturn void app_main()
{
    // Override global log level
    esp_log_level_set("*", ESP_LOG_INFO);
    esp_log_level_set("*", ESP_LOG_DEBUG);

    // To debug, use 'make menuconfig' to set default Log level to DEBUG, then uncomment:
    //esp_log_level_set("owb", ESP_LOG_DEBUG);
    //esp_log_level_set("ds18b20", ESP_LOG_DEBUG);

    // Stable readings require a brief period before communication
    vTaskDelay(2000.0 / portTICK_PERIOD_MS);

    // Create a 1-Wire bus, using the RMT timeslot driver
    OneWireBus * owb;
    owb_rmt_driver_info rmt_driver_info;
    owb = owb_rmt_initialize(&rmt_driver_info, GPIO_DS18B20_0, RMT_CHANNEL_1, RMT_CHANNEL_0);
    owb_use_crc(owb, true);  // enable CRC check for ROM code

    // Find all connected devices
    printf("Find devices:\n");
    OneWireBus_ROMCode device_rom_codes[MAX_DEVICES] = {0};
    int num_devices = 0;
    OneWireBus_SearchState search_state = {0};
    bool found = false;
    owb_search_first(owb, &search_state, &found);
    while (found)
    {
        char rom_code_s[17];
        owb_string_from_rom_code(search_state.rom_code, rom_code_s, sizeof(rom_code_s));
        printf("  %d : %s\n", num_devices, rom_code_s);
        device_rom_codes[num_devices] = search_state.rom_code;
        ++num_devices;
        owb_search_next(owb, &search_state, &found);
    }
    printf("Found %d device%s\n", num_devices, num_devices == 1 ? "" : "s");

    // In this example, if a single device is present, then the ROM code is probably
    // not very interesting, so just print it out. If there are multiple devices,
    // then it may be useful to check that a specific device is present.

    if (num_devices == 1)
    {
        // For a single device only:
        OneWireBus_ROMCode rom_code;
        owb_status status = owb_read_rom(owb, &rom_code);
        if (status == OWB_STATUS_OK)
        {
            char rom_code_s[OWB_ROM_CODE_STRING_LENGTH];
            owb_string_from_rom_code(rom_code, rom_code_s, sizeof(rom_code_s));
            printf("Single device %s present\n", rom_code_s);
        }
        else
        {
            printf("An error occurred reading ROM code: %d", status);
        }
    }
    else
    {
        // Search for a known ROM code (LSB first):
        // For example: 0x1502162ca5b2ee28
        OneWireBus_ROMCode known_device = {
            .fields.family = { 0x28 },
            .fields.serial_number = { 0xee, 0xb2, 0xa5, 0x2c, 0x16, 0x02 },
            .fields.crc = { 0x15 },
        };
        char rom_code_s[OWB_ROM_CODE_STRING_LENGTH];
        owb_string_from_rom_code(known_device, rom_code_s, sizeof(rom_code_s));
        bool is_present = false;

        owb_status search_status = owb_verify_rom(owb, known_device, &is_present);
        if (search_status == OWB_STATUS_OK)
        {
            printf("Device %s is %s\n", rom_code_s, is_present ? "present" : "not present");
        }
        else
        {
            printf("An error occurred searching for known device: %d", search_status);
        }
    }

    // Create DS18B20 devices on the 1-Wire bus
    DS18B20_Info * devices[MAX_DEVICES] = {0};
    for (int i = 0; i < num_devices; ++i)
    {
        DS18B20_Info * ds18b20_info = ds18b20_malloc();  // heap allocation
        devices[i] = ds18b20_info;

        if (num_devices == 1)
        {
            printf("Single device optimisations enabled\n");
            ds18b20_init_solo(ds18b20_info, owb);          // only one device on bus
        }
        else
        {
            ds18b20_init(ds18b20_info, owb, device_rom_codes[i]); // associate with bus and device
        }
        ds18b20_use_crc(ds18b20_info, true);           // enable CRC check on all reads
        ds18b20_set_resolution(ds18b20_info, DS18B20_RESOLUTION);
    }

//    // Read temperatures from all sensors sequentially
//    while (1)
//    {
//        printf("\nTemperature readings (degrees C):\n");
//        for (int i = 0; i < num_devices; ++i)
//        {
//            float temp = ds18b20_get_temp(devices[i]);
//            printf("  %d: %.3f\n", i, temp);
//        }
//        vTaskDelay(1000 / portTICK_PERIOD_MS);
//    }

    // Check for parasitic-powered devices that require a strong-pullup
    bool require_strong_pullup = false;
    ds18b20_check_for_parasite_power(owb, &require_strong_pullup);
    printf("Strong pullup (parasitic power) %srequired\n", require_strong_pullup ? "" : "not ");
    if (require_strong_pullup)
    {
    }

    // Read temperatures more efficiently by starting conversions on all devices at the same time
    int errors_count[MAX_DEVICES] = {0};
    int sample_count = 0;
    if (num_devices > 0)
    {
        TickType_t last_wake_time = xTaskGetTickCount();

        while (1) {
            last_wake_time = xTaskGetTickCount();

            ds18b20_convert_all(owb);

            // In this application all devices use the same resolution,
            // so use the first device to determine the delay
            if (require_strong_pullup) {
                ets_delay_us(750000);
                gpio_set_level(5, 0);
            }
            else
            {
                ds18b20_wait_for_conversion(devices[0]);
            }

            // Read the results immediately after conversion otherwise it may fail
            // (using printf before reading may take too long)
            float readings[MAX_DEVICES] = { 0 };
            DS18B20_ERROR errors[MAX_DEVICES] = { 0 };

            for (int i = 0; i < num_devices; ++i)
            {
                errors[i] = ds18b20_read_temp(devices[i], &readings[i]);
            }

            // Print results in a separate loop, after all have been read
            printf("\nTemperature readings (degrees C): sample %d\n", ++sample_count);
            for (int i = 0; i < num_devices; ++i)
            {
                if (errors[i] != DS18B20_OK)
                {
                    ++errors_count[i];
                }

                printf("  %d: %.1f    %d errors\n", i, readings[i], errors_count[i]);
            }

            vTaskDelayUntil(&last_wake_time, SAMPLE_PERIOD / portTICK_PERIOD_MS);
        }
    }
    else
    {
        printf("\nNo DS18B20 devices detected!\n");
    }

    // clean up dynamically allocated data
    for (int i = 0; i < num_devices; ++i)
    {
        ds18b20_free(&devices[i]);
    }
    owb_uninitialize(owb);

    printf("Restarting now.\n");
    fflush(stdout);
    vTaskDelay(1000 / portTICK_PERIOD_MS);
    esp_restart();
}